Welcome Sheddie, this blog is about sheds, we love sheds. You can share your shed, or view other people's sheds. If you're new here, you may want to subscribe to our RSS feed or by Email, or read our past posts, or maybe you would like to buy a shed?

This forum requires Javascript to be enabled for posting content
You must be logged in to post Login Register

Search 
Search Forums:


 




Power, water, drains and network

UserPost

2:43 am
October 23, 2008


juliangall

sheddie

posts 2

1

I am planning an all-year-round shed/den/garden office which will need the full range of services. This may sound a bit extravagant but we need to use it as a temporary bathroom while some major work is done on the house. It seemed a good opportunity to get the ultimate shed at the end of it!

For the drain, I am going to put an inspection chamber next to the shed and run a straight length of pipe in a suitable trench to the nearest manhole (in my garden). My questions are:

  1. Can I (regulations or otherwise) run a water pipe and an electrical cable in the same trench next to the drainpipe?
  2. Is it better to use sheathed cable directly in the ground or ordinary cable in a conduit? If the latter, what's the best thing to use (for the conduit)?
  3. Is it better to bring the drain and water up through the shed floor or in through the wall? Neatness and frost protection suggests through the floor would be best but they wouldn't be so accessible.
  4. I know electrical work is tightly regulated. Do the regs just cover getting a qualified electrician to connect everything up or wiil they need to be involved in sinking the cable?
  5. Do I need a vent stack for the drain? As the top could only be at shed roof height, might this cause problems with smells in the garden?

I suppose my preference would be for channel-tunnel-style twin 100mm pipes, one for the drain and one for everything else. That would make it very easy to run further cables etc. in future if required. Is that a good idea?

Hints, tips and wise words of wisdom on any or all of the above most gratefully received. Thanks in advance.

Julian


5:19 am
November 13, 2008


AndyFromWorkshopShed

Super sheddie

London

posts 4

2

You don't really want to put your network or telephone cables next to power cables as you could get interference. For power you really need to use SWA (Stranded Wire Armour) it's cable wrapped in steel wire. The thickness of the cores is dependant on the distance and the load so you need to tell your electrician about your current (excluse the pun) and planned requirements.

I did consider the idea of conduit but the SWA cable is very heavy and you are going to find it difficult to pull a new one of those through the conduit. You might be able to pull a new telephone or network cable though.

Here's my construction notes on the electrics: http://www.workshopshed.com/search/label/Electrics


8:11 am
November 13, 2008


juliangall

sheddie

posts 2

3

Thanks very much for those comments and the link to your articles. Very helpful. I'm coming to the view that I will have the drain pipe at the bottom of the trench in the middle. On one side and about level with the top of the drain, I'll have the armoured mains cable. And on the other side level with the top of the drain, I'll have the water pipe and a conduit for network etc. The trench will be 45-50cm wide so that should give good separation between mains and network cables.

Julian

 

About the We love sheds @ shedblog.co.uk forum

Currently Online:

2 Guests

Maximum Online: 27

Forums:

Groups: 1

Forums: 5

Topics: 26

Posts: 101

Members:

There are 81 members

There are 1 guests


Wilco has made 37 posts

Top Posters:

simon - 28

AndyFromWorkshopShed - 4

Shedworking - 4

John - 3

Morgan - 2

Administrator: Wilco | Moderators: Wilco


© Simple:Press Forum - Version 3.1.4 (Build 357)